7

Total number of pictures: 8

Project sheet (PDF)

Material Data

Front and side elevation 1
PLEXIGLAS^® Mineral, solid surface material for cladding of rear ventilated curtain facades

• PLEXIGLAS^® Mineral, solid surface material 10mm,
  round corner 90°element, thermoformed,
  element height 2780 mm, silky smooth satin
  finished surface
• PLEXIGLAS^® Mineral, solid surface materials Mineral BV and Mineral NF, silky smooth satin finished surface, concealed fixed by undercut

Front elevation

• Facade element of a designed-surface
  PLEXIGLAS^® Mineral cover layer and an insulation system combining a vacuum insulation panel (VIP)
  with insulating material Calostat^®, thickness approx. 90 mm
• PLEXIGLAS^® Mineral, solid surface materials Mineral BV and Mineral NF, high gloss surface, concealed fixed by undercut

Fixing
Concealed fixing by undercut and adhesion on standard aluminium or wooden substructure, visible fixing (rivet/screw) also possible

Characteristics
Storey-high facade elements, maximum panel sizes with standard thicknesses of 6 – 12 mm up to 3050 × 2030 mm (larger and thicker on request), single panels can be welded to oversize panels without visible joints, 3-dimensional and round corner elements by high deformation behavior, different kind of structured surfaces with thermal treatment possible, homogeneous colourisation effects causes same coloured edges, fire behaviour according to DIN 4102 Plexiglas^® “B1” “not easily flamable” up to “B” “normal flamable” and Cs1 d0 according to DIN EN 13501, insulating material Calostat^® “A” “non-combustible”