Okhta Bank, St. Petersburg
Client
Owner / Developer
Architect
Building Function
Status
nps tchoban voss
Owner / Developer
Building contractor St. Petersburg Ltd.
Architect
- nps tchoban voss
- Jewgeni Gerassimov and Partner
Building Function
Office
Status
Completed 09/2011
Facade Scale
Height
Technical Features
approx. 19.000 m²
Height
approx. 90 m
Technical Features
- Facade inwardly bent
- Unitized curtain wall
- Skylight
- Door units
We provided
Consultancy
Sound facade decisions start with a clear understanding of the project’s starting point.
- Priedemann organises the available project information, design intent, use, and facade-related technical and external requirements.
- Together with the project participants, objectives, priorities, constraints and unresolved questions are made visible.
- This creates a reliable basis for the next design steps and for decisions before the facade concept is developed in greater detail.
- Priedemann identifies and structures the project information, requirements, objectives and constraints relevant to facade planning.
- These may include design intent, use, technical and energy-related requirements, local conditions, and quality, cost and programme objectives.
- Unresolved questions, dependencies and competing priorities are made explicit and translated into clear decision criteria.
- This creates a reliable basis for early facade design and subsequent planning.
- The subjects reviewed and documented depend on the project stage and agreed scope.
Decision criteria and priorities
- Not every facade requirement has the same priority within a project.
- Design intent, use, technical requirements, local conditions, quality, cost and programme objectives can influence one another.
- Establishing the project basis therefore also means structuring these requirements and making potential conflicts visible.
- The resulting criteria provide a shared basis against which later options and decisions can be assessed consistently.
Technical facade design develops an agreed facade solution into coordinated technical information for implementation.
- Details, components, connections and interfaces are brought together with requirements for construction, materials, building physics, acoustics, fire and safety.
- The required level of development depends on the project, procurement model and appointment.
- This creates a consistent basis for subsequent shop, production and installation planning.
- Technical facade design develops an agreed facade solution in sufficient detail for subsequent implementation.
- Depending on the appointment, Priedemann develops principle details, connections, layers, components, materials and dimensions, and coordinates interfaces with adjacent construction.
- Structural, building-physics, acoustic, fire and safety requirements are considered to the agreed design depth.
- The result is coordinated design information that can provide a basis for shop, production and installation drawings.
- The precise scope is defined for each project.
Facade specifications and tender documentation translate developed facade design into clear technical requirements for tendering and bid comparison.
- Priedemann structures information on construction, materials, details, interfaces and quality criteria and brings the relevant design documents together.
- Depending on the project, this can include technical preliminaries, specifications, quantity information or trade boundaries.
- The scope and function of the documents depend on the procurement and responsibility model.
- Priedemann translates the agreed facade design into technical specifications and tender documentation.
- Requirements, quality criteria, materials, components, interfaces and required evidence are structured and described clearly.
- Depending on the appointment, quantities, component schedules and other technical appendices may be included.
- The documents provide a consistent technical basis for bids and the subsequent award process.
- The scope and responsibility for the complete tender package are agreed with the client.
The supervision of assembly and installation is particularly important for us, to ensure the agreed quality. Our principle is that deviations from the agreed planning must be identified at an early stage, documented and the implementation corrected. This controlling refers both to production and manufacturing as well as to the assembly on the building site:
Regular inspection of production and assembly in the factory- Verification of compliance with the approved design, ensuring compliance with the agreed qualities, standards and test series
- Regular reporting on production progress; the reports contain recommendations for possible improvements as well as a list of unfulfilled services, performance arrears, defects identified
Regular inspection at the building site
- Verification of compliance with the approved design, ensuring compliance with the agreed qualities, standards and test series
- Inspection of examples of facade sections as reference values for determining the quality of workmanship – benchmark inspections
- Involvement in performance tests on the facade on the building site (water impermeability, sound insulation, blower door test, etc.)
- Random inspection of the installation work on the building site
- Regular reporting on the installation work including the identification of discrepancies with the original planning
Specials
Priedemann creates, analyses and optimises digital 3D models as a technical basis for further facade design and subsequent fabrication.
- Architectural surface or node models are translated into realistic solid models.
- This makes it possible to identify details that would be particularly challenging to build or could not be realised with available systems and products.
- Models can also be adjusted to bring fabrication requirements and architectural intent into better alignment.
- Priedemann analyses three-dimensional facade models and develops them for further technical work.
- Surface or node models are translated into realistic solid models and detailed so that relevant components, connections and geometric relationships can be assessed.
- Priedemann identifies details that are technically challenging or could not be realised with tested systems and approved products.
- The software and level of development depend on the project.
Memberships
